Lowongan Kerja Migas 2013 di PT Ceria Utama Abadi; 7 positions

1. Subsea Flowline, Installation Engineer, International Qualification • Bachelor/Master Degree in Engineering (Civil, Mechanical or Ocean) • 12+ years of proven and specialist experience in detailed design, procurement, offshore installation and commissioning on deepwater subsea projects with knowledge in deepwater installation of pipelines/flowline, manifolds, PLET/PLEM, jumpers and Steel Catenary Risers (SCR). • Experience planning and executing offshore installation activities for both flowlines and SCRs (contracting, vessel coordination, interface management, simultaneous operations, etc). • Over the last 8 years Candidate must have spent a minimum of 5 yrs holding position as Lead • Flowline/SCR installation Engineer either with an O&G Operator or an Installation Contractor. • Experience with SCR pulling system on Floating Production Units (FPU) for SCR installation. • Experience in Interfacing with FPU Contractor and Subsea Installation Contractor (SIC) for matters related to SCR installation. • Experience in defining and incorporating project Process Safety Management, HSE requirements into final project specification for execution and post-project operations. • Familiar with industry and regulatory codes, standards and recommended practices from API, ASME, DNV etc. Knowledge of pipeline coatings, thermal insulation, Field Joints, welding & NDE standards and procedures. • Experience in managing contracts; monitoring and approving contractor”s plans, procedures, and work output; knowledge of contract management procedures. • Knowledgeable of production operations and installation interfaces with Operations (Permit to Work, SIMOPs, Start- Up Procedures and Operations). • Works effectively with others and strives to reach agreement on key interface issues. Has high ability to achieve goals using influence and trust. Ability to work with Operations Field Personnel is important • Willing to be travel and positioned in the field within fabrication/construction phases 2. Senior Construction, Engineer – Hull Site Team, International Experience Qualification • Bachelor/Master Degree in Engineering (Mechanical, Civil, Naval Architecture, Ocean, or similar applicable field) • 15+ years of proven and specialist experience in hull construction, especially for F(P)SO”s and similar offshore floating structures. • Experience with riser and mooring system interfaces to hull strongly preferred. • Experience planning and executing hull construction and commissioning activities for F(P)SO and similar offshore floating projects. • Experience managing junior construction engineers of varying disciplines. • Familiar with industry and regulatory codes, standards and recommended practices from Classification Societies, ASME, etc. • Experience in managing contracts; monitoring and approving contractor”s plans, procedures, and work output; knowledge of contract management procedures. • Demonstrated ability to effectively communicate with cross functional disciplines within the project team as well as engineering, fabrication, and installation contractor representatives including Operation team outside the project team. • Works effectively with others and strives to reach agreement on key interface issues. Has high ability to achieve goals using influence and trust. • Ability to work with Operations Field Personnel is important • Willing to be travel and positioned in the field within fabrication / construction phases 3. Sr Construction Engineer – Topsides and Integration, International Experience Qualification • Bachelor/Master Degree in Engineering (Mechanical or Civil desired) • 10 or more years experience with construction work on large projects. • Experience includes use of design, construction and behavior based safety principles and concepts, working and communicating with multifunctional project teams. • Highly qualified in one engineering discipline and a broad understanding of principles and techniques in other disciplines. • Performed as field / fab yard representative for one or more disciplines, one or more areas of a project and supervised other field construction staff. • Understands customer focus and anticipates opportunities. • Works effectively with others and strives to reach agreement on key interface issues. • Has high ability to achieve goals using influence and trust. • Knowledge of business principles and their application to projects (i.e. life cycle cost, IRR, Cash Flow, NPV, etc.). • Familiar with industry and regulatory codes, standards and recommended practices from API, ASME, DNV etc. • Experience in managing contracts; monitoring and approving contractor”s plans, procedures, and work output; knowledge of contract management procedures. • Willing to travel and be positioned in the field within fabrication / construction phases 4. HES Specialist – Compliance Assurance National National • Bachelor/Master degree in HES or relevant technical discipline – Master degree would be an advantage. • A thorough knowledge of the current legislation and new regulation in Indonesia (national and local governments regulations requirements which are applicable to offshore Major Capital Project) • Proficient with Oil and Gas Compliance Assurance and GOI permitting processes. • Considerable experience in the practical application of Compliance Assurance system and tools. • Have experiences on Compliance Assurance (CA) implementation, preferably CA execution in Major Capital Project. • Have experiences on obtaining permits and approvals from Central Government Agencies and Provincial or Local Government Agencies • Have experiences in managing prerequisite surveys and studies to permits approval process. • Have participated in GOI Agencies seminars, course or trainings related to the permitting and approval process would be advantage. • Good technical proficiency in communication to Government Agencies” officer or staff. • Good supervision, teamwork and communication skills.Computer literacy. • Willing to travel to fabrication yard and project sites during construction phases. 5. Data Base Administrator - National • Formal Educational Requirements (or equivalent) : • Bachelor”s degree in Computer Science or related majors. • Other disciplines with extensive experience in Data Management will be acceptable. • Type and Length of Experience Required (or equivalent): Overall 11-13 years of experience in IT in general; Minimum five years applications systems implementation that involve data management (data mining, ETL, presentation/reporting). • Understand Project Management Process and Document/Information management System. • Have knowledge and skill in Business Analysis, Application development and maintenance • Proficient in data management (Data mining, ETL, data presentation) • Have knowledge and skill in Information Protection (Data security and access control, data backup/recovery) • Have knowledge and experience in system performance assurance Experience in supporting primavera database and Sharepoint • Knowledge and experience in database management product (ORACLE, SQL Server, etc) is an advantage. 6. Commissioning Lead Electrical International National • Bachelors degree in Electrical Engineering or relevant • Certification courses Minimum 11-15 years experience in oil and gas and / or petrochemical industry • 5-10 years in pre-commissioning and commissioning of electrical equipment • Familiarity with construction activities such as cable installation; cable continuity and insulation testing; insulation testing of generators, transformers, motors, panels; earthing checks; lighting and socket outlet checks; preservation etc 7. IM Analyst/ IM Handover analyst National (9 personnel) . National • Minimum of 5 years experience in document control management and using Document • Management Systems, especially for Oil & Gas industry. • S1 Degree in Library & Information Studies or minimum D3 degree in • Engineering (Computer Science, Information Technology, Electrical) • Good IM and IT skills including understanding of the Microsoft office suite and Adobe Acrobat • Proficient in data entry skills Strong customer focus • Strong understanding of Information management and document control principles • Self motivated with ability to work in a methodical and pragmatic using initiative and with minimum supervision. • Demonstrated capacity to learn new skills and integrate new knowledge into existing work activities • Proven experience of Engineering Document Management processes, tools and information products in support of design and vendor engineering information. • Ability to read technical engineering drawings an advantage Please advertise our opening position. Email CV to ceria@cbn.net.id,Subject : CV IDD Project – position

Read more »

Posted in: Lowongan Kerja Migas 2013

Lowongan Kerja Migas 2013 di PT Istech Resources Asia; Field Digital Infrastructure Analyst

PT ISTECH RESOURCES ASIA
Engineering & Management Consultancy Services

FIELD DIGITAL INFRASTRUCTURE (FDI) ANALYST

• Key Accountabilities
- The position will be responsible to plan, design, manage procurement process and implement a broad range of Network and Telecommunication system that is consistent with Indonesian regulations, Company’s engineering Technical Practices and Site Practices, including Local Area Network, Wide Area Network, IP Telephony, VSAT, Public Address and General Alarm, 2 Way Radio System, CCTV, FIDS, Access Control System This responsibility includes managing contractor personnel during implementation of a project.
- This position may work for up to 4weeks in remote area such as, Offshore Drilling Rig, Warehouse Barge, LNG plant, other remote locations.
- The position will be actively involved in IT&S risk evaluation and management, and looking for continuous improvement opportunity in delivery of the service specifically on FDI scope but also on a broader IT&S scope. This position will be working with a more senior FDI engineer. It is expected that the work for this position will, be coordinated by the more senior P01 engineer

• Essential Education
Relevant S-1 Degree from reputable University

• Essential Experience & Job Requirements, Skills & knowledge
• Candidate should have at least 4 years work experience in network/telecommunications field
- hands on experience with various Cisco LAN and WAN equipment
-VSAT system
- Involved in installation of Telecommunications/Network equipment/system in Oil and Gas Operations field

• Candidate should have good command and comfortable in speaking and writing in English.
• Candidate should
- Have good analytical capabilities
- Have a positive attitude toward safety and operational integrity
-Be able to communicate ideas in a structured and concise manner both verbally and in writing.
- Be able to work in demanding situation and have good interpersonal skill to deal with customer/users, peers and supervisor
• Candidate should be self-motivated, and able to work independently or as part of team.
• Desirable criteria & qualification
- Candidate has the experience in working with FEED and EPC contract for telecommunication system in Oil and Gas industry project.
- Candidate has experience in installations or operations of 2-way radio system installations or operations (trucked radio system, conventional 2-way radio system, VHF marine), PA/GA, CCTV~ Access Control System.
- Candidate has 2 years experiences or more in project management delivering Telecommunication Infrastructure System projects in oil and gas industry, onshore and offshore.
- Candidate shall be conversant with relevant International Industrial Codes and Standards in Telecommunication and Oil and Gas industry including but not limited to: IEEE, IEC/NEC, EIA/TIA, and ITU-T.
- Candidate shall be familiar with IEC/NEC codes for Hazardous Area Classification
- Candidate shall be familiar with risk analysis method and assessment, Hazard and Operability (HAZOP), Control HAZOP, LOPA (Layer of Protection Analysis), and SIL (Safety Integrity Level).

An interesting remuneration package will be offered to qualified candidate,
All applicants will be treated confidentially.
For full job descriptions, and to apply online please go towww.istechgroup.com/career

Read more »

Posted in: Lowongan Kerja Migas 2013

Lowongan Kerja Migas 2013 diPT Bhumi Phala Perkasa; 3 positions

URGENTLY REQUIRED A well-established services company for oil & gas and mining industry urgently need for the following positions: 1. MECHANICAL MAINTENANCE ENGINEER (MME) 2. MECHANICAL SUPERVISOR (MS) 3. MECHANICAL TECHNICAL REPRESENTATIVE (MTR) 4. MECHANICAL TECHNICIAN (MT) 5. ELECTRICIAN TECHNICIAN (SET) 6. HSE SPECIALIST (HSE) Requirement: 1. Male Max 45 Years old. 2. Experience 10 Years(1,2) 5 years:(3,4,5,6) 3. S1 Mechanical Engineering degree: (3,1) min D3 HSE Diploma or Relevant (6), Senior Technical High School (2,4,,5,) 4. Good Communication Ski1l Both English and Indonesia and Capable Writing report in English (1.2,3,4,5,6) 5. Computer Literacy (1,2.3,4,5,6) 6. Capable of Job Skill Knowledge in Engineering aspect of design basis, calculation mechanical equipment Performance such as Engine, Compressor and Pomp (1) 7. Capable In troubleshooting, repair, Maintenance Engine/Generator Set (2,4,5) 8. Experience in rise Engineering/ Construction and Should be in Management of HSSE within on EPCI Framework (6) Please Send and Complete CV and Photograph to: PT Bhumi Phala Perkasa Sentral Senayan 2, 16th Floor, Jl. Asia Afrika No. 8 Jakarta, Indonesia 10270

Read more »

Posted in: Lowongan Kerja Migas 2013 di PT Bhumi Phala Perkasa

Lowongan Kerja Migas 2013 di PT Istana Karang Laut; 5 positions

1. Project Manager

Managing all activity in relation with assigned project including interface with all party both internal (ie Engineering, Procurement, etc) and external (client, vendor, etc)

Requirement:
- Min Bachelor Degree in Engineering, but Mechanical Engineering is preferable
- Min 5 year experiences as Project Manager in Oil & Gas Project in domestic and overseas
- Good communication in English
- Will be placed in Jakarta Office

2. Proposal Manager

• Manage and monitoring of proposal / tender preparation
• Ensure the process of preparation running well until get the result.
• Ensuring all tender file completely received
• Ensuring that the requirements of tender is clearly translated
• Ensuring that scope of work/instruction to other department is distributed
• Ensuring that other department will submit their scope of work as per schedule
• Ensure that all tender documents is properly prepared to comply with Customer specification/requirement included Technical, Administration and Finance requirement.
• Review the proposal with related department prior to sub mission.

Requirement:
- Min Bachelor Degree in Engineering
- Min 5 years experience in same position on oil & gas industry
- Good knowledge in all process of tender, include technical and commercial
- Fluent in English
- Will be placed in Jakarta Office

3. Process Engineer

• Coordinating preparation of process and ensure all process aspect meet with Client requirement or International Standard.
• Check and discuss with other discipline engineer and drafting office to ensure other discipline comment to be incorporated with process design
• Coordination of process design with licensors (BRE, NAO, CECA, AXENS)
• Preparation of process design related calculations, documents i.e:
- Material balance
- P.F.D.
- P+I.D.
- Process data sheets
- Operating and shutdown philosophy
- Operation manual
•Assistance to prepare proposal

Requirement:
- Min Bachelor Degree in Chemical Engineering
- Min 2 year experiences in process design engineering for oil & gas project
- Good applicable in HYSYS
- Fluent in English
- Will be placed in Jakarta Office

4. E & I Commissioning Engineer

Will be responsible for commission the plant as per commissioning schedules

Requirements:
- Min Bachelor Degree from Electrical Engineering
- Min. 10 years of relevant experience in the design & commissioning of onshore/offshore facilities.
- Shall have an intimate & working knowledge of the applicable international code & standard.
- Shall have been a principle engineer responsible for design, analyze & review of the design facilities
- Jakarta based, with high frequent to assign in project site

5. Proposal Engineer

• Review new inquiry / tender files
• Request and expedite the required data from Engineering and other related department
• Coordinate with Engineering to prepare technical specification to be issued with RFQ to vendor / sub contractor
• Check all tender submissions, documentation for accuracy with clients requirements.
• Determine of deviation and listed in the tender / proposal
• Ensure bid bonds are prepared in time
• Check, review estimate and summarize base cost

Requirement:
- Min Bachelor Degree in Mechanical Engineering
- Min 5 yr experiences in handling proposal and tender for oil & gas industry
- Good knowledge in estimation, procurement, fabrication, and construction process.
- Excellent in English

Please send your resume to recruitment@istakala.com, and only shortlisted will be notified

Read more »

Posted in: Lowongan Kerja Migas 2013 di Istana Karang Laut

Lowongan Migas Terbaru 2013 di GASCO

GASCO is an operating Company engaged in the extraction of Natural Gas Liquids (NGL) from associated and natural gas. With a process capability of 5,500 million standard cubic feet of feed gas (MMSCFD) per day and producing 285,000 barrels of condensate, 4,500 tons of sulphur and 28,000 tons of NGL per day, GASCO is currently one of the largest gas processing companies in the world. GASCO”s industrial complex in Habshan, one of the biggest in the United Arab Emirates, is now looking for qualified staff for the following vacant positions: 1. Mechanical Engineer 2. Instrument and Control Engineer 3. Electrical Engineer 4. Mechanical Technician 5. Instrument Technician 6. Electrical Technician 7. Operator Total vacant is more than 80 position MECHANICAL ENGINEER PURPOSE: To plan, supervise and coordinate all Maintenance activities for GASCO Plant Mechanical equipment, to ensure availability and reliability. BACKGROUND: The Mechanical Engineer reports to the respective Maintenance Section Head. Main areas of responsibility for this position consist of supporting the preventive, corrective, troubleshooting, shutdown, and major & minor maintenance activities on various types of mechanical static and rotating plant equipment situated in designated plant site areas. Contacts for this position would commonly be engineering and supervisory personnel, supervision of assigned subordinates, HSE and Operations personnel, materials department staff, plus contractor and outside vendor employees. It is a major challenge to continuously ensure reliability and availability of equipment under his assigned area, when consideration is given to the ageing of plant, structures and equipment. MAIN ACCOUNTABILITIES: • To ensure that all the plant and pipelines” rotating and static equipment are maintained, improved and/or replaced for optimum plant availability to meet the plant integrity requirements. • To plan and coordinate Mechanical Maintenance activities with other departments and sections. • To conduct root cause analysis of equipment failures and non-scheduled shutdowns and recommend problem resolutions. • To ensure effective utilization of the Maximo system in managing Maintenance and Breakdown activities. • To compile/provide input for preparation of division/department Capital, Operating and 5-Year plan budgets, and monitor/control expenditures. • To ensure that all the required materials, spares, consumables, and tools are of the right quality and quantity, and available on a continuous basis. • To participate in Risk Assessment exercises and prepare recommendations and guidelines to address the findings. • To enforce the implementation of GASCO Health, Safety, and Environment Management System (HSE-MS). • To ensure all the Maintenance activities are carried out in line with the requirements outlined by the GASCO PTW system. , MINIMUM REQUIREMENTS: • Bachelor”s degree (or higher) in Mechanical Engineering • Must have minimum 6 years hands-on experience in Oil & Gas or relevant industry involving Rotating Equipment troubleshooting, overhauling and maintenance of Pumps, Compressors, and Turbines. Must also have experience in Static Equipment maintenance (e.g. vessels/tanks/exchangers, etc.). • Must have experience in Maintenance Planning, Material & Resource, and budget preparations. • Since this position will be having direct subordinates and managing a team, the preferred candidate must also have supervisory skills. INSTRUMENT AND CONTROL ENGINEER PURPOSE: To plan, lead and direct the maintenance activities of a wide range of Control Systems in the assigned area, and coordinate these activities with operations and other maintenance sections. BACKGROUND: The Instrument & Control Engineer reports to the Instrument & Control Section Head/ concerned Area Maintenance Section Head. Main areas of responsibility is controlling the preventive, corrective, troubleshooting, shutdown and major and minor maintenance activities, on various types of instrumentation and control systems, which are used for managing process plant, advanced process control, static & rotating equipment and custody transfer measurements in the plant. The main challenges are to establish a more comprehensive back up and software library for disaster recovery, due to the complexity and variety of control systems of the plant, to ensure the smooth integration of Instrument & Control sections, taking into account the diverse types and ages of the equipment and resolve the obsolescence and reliability issues of critical systems. He is responsible for the control systems and a variety of Field Instrumentation systems. The system monitors and controls Gas Process Plants, Sulphur Units, Compressors, Power Generators, Gas Turbines and Utility Plant. MAIN ACCOUNTABILITIES • To coordinate the testing, repairing, calibration and trouble shooting of the Instrumentation Control systems. • To provide field supervision over the execution of critical maintenance activities of the equipment and ensure that the problems are resolved with minimum down time. • To comply with Gasco Health, Safety and Environment Management System (HSE-MS). • To evaluate the manpower requirement for daily preventive, break down and shutdown maintenance prepare the job schedule. • To monitor the work order status for obstacles, and to re-schedule the task if required. • To monitor and control spares inventory in coordination with purchasing division by analyzing the stock level and rate of consumption. • To ensure optimum utilization of the MAXIMO system for maintaining job history. • To liaise with Mechanical and Electrical sections and establish a seamless integration between operation and maintenance teams. • To prepare and review various maintenance performance reports such as Preliminary Failure and Root Cause Analysis Reports. • To compile/provide input for preparation of division/department Capital and Operating budgets and monitor annual expenditure budgets. MINIMUM REQUIREMENTS • Bachelor Degree in Instrumentation Engineering • 7 Years Experience ELECTRICAL ENGINEER PURPOSE: To plan, supervise and coordinate all Maintenance activities for GASCO Plant Electrical equipment, to ensure availability and reliability. BACKGROUND: The Electrical Engineer reports to the Electrical Section Head/ concerned Area Maintenance Section Head. The main challenges are to ensure the availability and reliability of electrical system/equipment, in view of equipment age, obsolescence, and diverse range of manufacturers, to improve speed of diagnosis and rectification of power failure situations, so as to reduce downtime and to integrate new facility installations with existing electrical systems, commission and tie-in with the existing electrical network, considering the unknown performance characteristics of the integrated system and equipment. MAIN ACCOUNTABILITIES: • To plan and carry out the Predictive/Reliability Centered Maintenance (RCM) programs like Dissolved gas analysis, Partial Discharge test, etc. for condition monitoring of all electrical equipment thereby ensure improved machine availability and power system reliability. • To comply with GASCO Health, Safety and Environment Management System (HSE-MS) and also promote awareness among the staff. • To conduct Internal Safety audit of the installations in the assigned plants including camps with regards to Electrical equipment and develop action plans for area maintenance engineers to take up corrective measures. • To review periodic & shutdown work plans and integrate activities with other sections for their execution. • Responsible for technological up-grading of obsolete equipment, preparation & execution of Plant Change Requests (PCRs) for modification in existing facilities. • To compile/provide input for preparation of division/department Capital, Operating and 5-Year budgets, and monitor/control expenditure. • To carry out detailed engineering, prepare scope of work, technical evaluation and execution for Capital, Extra Ordinary Maintenance (EOM) and Major Maintenance (MM) activities. • To review the existing maintenance practices and support implementation of innovative & modern methodologies for enhanced productivity leading to improvement in MTBF. To ensure optimum utilization of the CMMS (MAXIMO) system for maintaining job history and data quality so as to ensure retrieval of quality information. • To perform High Voltage switching activities. • To prepare method statements for critical jobs, verify electrical procedures and instructions, plus scope of work for contract jobs and service work orders. • To support CD for technical evaluation of bids and inspection of materials on receipt. MINIMUM REQUIREMENTS: • Bachelor”s degree (or higher) in Electrical Engineering • Must have minimum 6 years hands-on experience in Oil & Gas or relevant industry involving Electrical distribution & protection systems to include participation in PM maintenance activities. • Must have experience in Maintenance Planning, Material & Resource, and budget preparations. • Since this position will be having direct subordinates and managing a team, the preferred candidate must also have supervisory skills. MECHANICAL TECHNICIAN PURPOSE : To perform preventive, breakdown and shutdown mechanical maintenance activities of static and rotating equipment. BACKGROUND : The Mechanical Technician reports to the Mechanical Supervisor. His main areas of responsibility involve the maintenance of major rotating equipment such as Gas Turbines, gas compressors, turbo expanders, blowers, diesel prime movers, pumps, valves and fin fan coolers. MAIN ACCOUNTABILITIES: • To perform and participate in the preventive, corrective and troubleshooting mechanical maintenance activities of the plant equipment, Gas Turbines, Compressors and Pumps. • To attend Toolbox meetings to establish scope of work activities such as safety requirements permits to work, special tools and materials. • To operate, repair and perform functional testing of tackle and lifting equipment, to the recognized standards. • To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures. • To troubleshoot, identify and isolate faulty components, on Rotating, Gas Turbine and Compressor equipment, using P&IDs, manufacturers” manuals, drawings and diagrams. • To identify spare parts required for maintenance work, from manufacturers” drawings and spare parts lists. • To perform shutdown maintenance repair and overhaul on all rotating and static equipment, including Gas Turbines, Compressors & Pumps. • To participate in condition monitoring checks on machinery, and notify any malfunctions or defects to the immediate supervisor. • To be a member of the Engineering Emergency & Fire Backup 24 hour roster team, for performing ship connection & disconnection and safety support duties. • To observe operation of all equipment during routine activities for abnormalities, and report any defects to relevant Supervisor. Having hands-on exposure on the following: • Preventive and/or corrective maintenance of rotating & static equipments (e.g. multi-stage pumps, compressors, gas/steam turbines, blowers, all types of bearings & valves, mechanical seals assemby/disassembly, etc). • Must know usage of all measuring tools & knowledge of clearances • Alignment Techniques (must specify what techniques you actually did/actual hands-on exposure) • Must have knowledge & exposure in Permit to Work (PTW) systems • Familiar with HAZOP/HAZID, H2S and best Safety practices • Ability to fully read & interpret P&ID, Process Flow and other engineering drawings MINIMUM REQUIREMENTS: • Diploma in Mechanical or equivalent Tech. Related • 4 Years Experience in the same field INSTRUMENT TECHNICIAN PURPOSE: To perform preventive, corrective and troubleshooting maintenance, and testing of all Plant Instrument Process Monitoring, Control Protective equipment. BACKGROUND: Instrument Technician reports to the Instrument & Control Engineer. Responsibilities include working with Digital Governor Controls, PLC systems, Microprocessor controls and various conventional pneumatic & electronic Instruments, all of which require the ability to read & understanding engineering drawings such as P & IDs, loop drawing, ladder logic and block & functional diagrams. MAIN ACCOUNTABILITIES: • To perform preventive, corrective and diagnostic maintenance on the process control systems and control loops. • To remove, dismantle, overhaul/repair and install electric, pneumatic, electronic or hydraulic control system such as control valves and actuators, recorders, measuring and recording instruments in the field or in the workshop. • To perform preventive and emergency maintenance on all equipment on site, as well as during machine scheduled or unscheduled shutdowns. • To perform modification of control circuits and/or control loops as per the plant change requests and update all related plant drawings to reflect the actual changes. • To assist other sections such as electrical, mechanical and workshop in the repair and troubleshooting of their instrument and electronic related systems and test equipment. • To perform upgrade and retrofitting of new control instruments to the existing panels in the field and main control room. • To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures. • To input data into the MAXIMO maintenance system, such as work order activities, materials and spares, failure reports and manpower statistics. • To perform regular calibration and maintenance of all safety, fire and gas equipment such as gas monitors, H2S monitors, smoke detectors and heat detectors to conform to #6. • To troubleshoot, repair, calibrate and test various types of process control instruments and relay logic, which include pneumatic, electrical and electronic instruments. MINIMUM REQUIREMENTS: • HCT D./ATI/ Equivalent in Tech. or Related • 4 Years Experience in the same field ELECTRICAL TECHNICIAN BACKGROUND: The Electrical Technician reports to the Electrical Supervisor/Senior Technician. He receives work assignments, briefing and guidance from senior section and engineering personnel, and plans and arranges the manpower and material assigned for the job and prepares these for the day”s activities. He receives the PTW from the senior section and engineering personnel and executes the job in a safe and effective manner. He ensures that the High and Low Voltage equipment released, is safe for normal operation and attends/requests toolbox meetings wherever essential to ensure safe execution of a job. MAIN ACCOUNTABILITIES: • To carry out preventive maintenance activities based on Maximo work orders, and carry out skilled maintenance, repair and testing of electrical equipment. • To participate in the assigned plant shutdown activities and ensure timely completion of job activities. • To isolate and energize LV and HV motors and accept electrical permit to work. • To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures. • To provide work direction and instruction to the contractor craftsman. • To verify completed maintenance activities and ensure that the job is performed as per requirement and complete the maintenance activity sheet. • To collect technical data from the field if requested by senior technician/area engineer. • To provide On Job Training to meet Competency Based Training programs for UAE Nationalization. • To provide input for the preparation of Method statements and Initiate Near miss reports. • To identify areas for improvement in the activities performed and assist the senior section personnel to carry out modifications and improvements to the system. • To carryout visual inspection and be vigilant to identify any developing problem in the area assigned, and report any problems to relevant supervisor. • To participate in Emergency Response duties as a team member. MAIN CHALLENGES: • To ensure the integrity and reliability of electrical system/equipment, in view of equipment age and obsolescence. MINIMUM REQUIREMENTS: • Diploma – Technical Related • 4 Years Experience OPERATOR PURPOSE: To operate and monitor process plant and facilities in the assigned area as per operating procedures and GASCO – HSE standards. BACKGROUND: The Operator reports to the Shift Controller. The Operator is responsible for the entire field operations of all equipment in his assigned area, and types of equipment generally consist of all or some of the following items: Pumps, compressors, turbines, storage tanks, separators, furnaces, pipelines, columns/vessels, control valves, block valves, loading arms and jetty equipment. He must also respond immediately to plant process upsets/emergencies and safety emergencies, which can include gas leaks and fires etc. He is normally the first person to observe and react to any field equipment abnormalities. MAIN ACCOUNTABILITIES: • To communicate and follow instructions of the Shift Controller to carry out duties efficiently and safely. • To check process parameters and coordinate with the Senior Operator to correct any deviations. • To carryout routine checks on equipment for abnormalities and inform Superior for prompt action. • To prepare the plant / equipments for maintenance ensuring adherence to standards. • To sign work permits, follow on-going jobs and monitor Contractors activities ensuring adherence to safety regulations and procedures. • To operate outside machinery and related equipment safely and efficiently as per Company standards and instructions. • To carry out duties as Auxiliary fireman or Site Safety Officer as and when required during emergencies, as per the Facility Response Plan. • To follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. • To receive chemicals, maintain the stock/consumption register and prepare chemical batches required for the process ensuring adherence to procedures. • To ensure compliance to all relevant safety, quality and environmental management policies, procedures and controls to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude. • To prepare various key Performance Indicator commitment checklists for management perusal. Having any or either of the following hands-on exposures/experience on Gas processing particularly NGL (Natural Gas Liquids): • Gas Sweetening – Sweetening Units – merox process, sulfrex process, Molecular Sieve-Mol sieves • Gas Separation • Gas Compression • Fractionation – Fractionation Train/Towers – De-ethanizer, De-propanizer, Debutanizer • Dehydration – Dehydration Unit – TEG, Glycol or PSA • Nitrogen Rejection – Cryogenic, Absorption process • Acid Gas Removal – Amine treating, Benfield process, PSA, Sulfinol process, etc. • NGL Recovery Units • Sulphur Recovery Units • H2S Removal Units • Gas Inlet facilities – slug catcher, inlet separator, condensate stripper; Fired heaters; heat exchangers; blowers; pumps; turbines & compressors, turbo expanders • Must have knowledge & exposure in Permit to Work (PTW) systems • Familiar with HAZOP/HAZID, H2S and best Process Safety practices • Basic ability to read & interpret P&ID, Process Flow and other engineering drawings MINIMUM REQUIREMENTS: • Secondary / ATI in Tech. or Related • 5 Years Experience in the same field It is important that : if you submitting your candidacy for the Engineer positions, you should mention the following in your CVs: • Proof that you have held responsibilities similar to Supervisory duties (e.g. managing a team of technicians, etc.) • How many are reporting to you or how many are your direct reports/subordinates. • The list of positions/titles (along with the numbers e.g. Technicians/Assistants/Helpers) directly reporting to you or your team that you are responsible in managing/supervising, because Engineer post in GASCO are responsible in managing/supervising a team. If you submitting your candidacy for Technician or Operator positions, you should mention the following in your CVs: • Your specific duties & responsibilities, • A clear list of all equipments you personally had hands-on experience, It would also be appreciated if you can mention the brand, type, make, model of the equipments. To increase your chance to be successfully recruited by GASCO, kindly prepare your best CV, strengthen your spirit, increase your skill and english conversation proficiency. Applications: If you are a qualified candidate and interested to apply the above position, please submit your CV by visiting this link for online application: www.megarainfield.com Campaign will be held tentatively within the month of July or August 2013, Attractive Salary will be offered, Other Benefits include: • Furniture Purchase Allowance, • Housing Entitlement • Education Assistance, Per Child, for Maximum of 4 children. • Car Purchase Loan, Free of Interest. • Health Insurance, Employee, wife and childrens. • End of Services Benefits, Kindly share this information to your colleagues,

Read more »

Posted in: Lowongan Migas 2013 di GASCO