Rabu, 30 Januari 2013

Lowongan Kerja Terbaru 2013 Migas di ConocoPhillips; 4 positions

GAS PRODUCTION CONTROLLER
COMPANY OVERVIEW
ConocoPhillips is the worlds largest independent upstream energy company, based on proved reserves and production of liquids and natural gas. Headquartered in Houston, Texas, the company had operations in almost 30 countries and approximately 16,700 employees as of May 1, 2013, with 2011 average production of 1.62 million BOE per day and proved reserves of 8.4 billion BOE as of Dec. 31, 2011.
BASIC PURPOSES / RESPONSIBILITIES
As member of a multi-discipline team, the Production Controller provides day to day management of the gas export pipeline system , including WNTS, Duyong and Belanak export system, ensuring safe gas delivery operation, gas nominations are met and the fields are produced optimally, balancing the needs of maintenance, well operations, projects and customers.
NATURE & SCOPE
The Production Controller:
• Gas Export Pipeline system, including WNTS, Duyong and Belanak Export line.
• Is part of multi-discipline team responsible for the management, engineering support, supply assurance, measurement,production control, commercial and gas accounting processes.
• Is a key member of the team, providing a critical link between operations and commercial aspects of the business.
• Working on rotational basis of 7 days work 7 days off, two shifts daily from 7a.m to 7p.m. A work premium to compensate the rotational shift is applied.
PRINCIPAL ACCOUNTABILITY
The Production Controller:
• Will form part of a multi-discipline team acting on behalf of the Indonesian state oil and gas company (BPMIGAS), the West Natuna Group of Production Sharing Contractors (PSCs), and Block B PSC in the delivery of hydrocarbon gas to Singapore and Malaysia.
• Acts on behalf of Sellers Representative, Pipeline Operator, WNG Supply Group Representative, and Block B PSC to co-ordinate and verifies gas nominations from customers, operate and control Singapore ORF and Duyong ORF.
• The duty controller ensures buyers and producers are kept up to date with their gas supply position within the day, and notify them of any production upsets likely to cause under delivery.
• Function advises the WNTS management and WNG production teams on issues relating to production, short term production planning and contract performance.
• Accountable to monitor integrity of total pipeline system.
• Accountable to coordinate communication between suppliers and Jakarta management, point of contact with Pipeline Protection vessel, any field activities related to pipeline integrity management.
QUALIFICATIONS
• Minimal Education Bachelor Degree, preferably major in mechanical, process or control system.
• Strong commitment, demonstration, and hands-on involvement in Health, Safety, and Environment.
• Self starter with less requiring close supervision. Ability to initiate ideas and implement.
• Well developed inter-personal skills
• Well developed knowledge of the gas contracts (WNG, Duyong and any future gas contracts) and its ancillary documents.
• Strong ability to clearly communicate verbally and in writing in English
• Possess distinguished critical thinking skills, to be able to quickly identify system problems and respond to them safely.
• Strong computer skills and experience, especially in data management and processing.
• Understand and experience in DCS, hydraulic management, or transactional software systems.
• Must be able to work in a team environment and possess above average leadership and analytical skills, people skills and the ability to participate in a team with cultural and technical diversity
- Additional Information : Only Indonesian citizen will be considered.
Sr Mechanical Engineer
Company Overview
ConocoPhillips is the worlds largest independent upstream energy company, based on proved reserves and productionof liquids and natural gas. In Indonesia, ConocoPhillips has been operating for more than 40 years and continues to growand play a role as one of Indonesias leading partner in meeting increasing energy demands by exploring new reserves aswell as maximizing the value of existing core areas. Were searching for highly motivated, top-performing individuals whoare seeking for the opportunity to develop, learn and grow with a dynamic and global company for the following position.
Basic Purpose / Responsibilities
To ensure that the assigned Stationary Equipment ( Pressure Vessel, Storage Tank, Heat Exchanger, etc.) modificationor projects works are executed in an expedient, cost effective, safe manner and in compliance with the CompanyEngineering Standards and International Codes.
Job Description
• Support other disciplines to identify and evaluate optimum field development scenarios.
• Analyze Stationary Equipment (Pressure Vessel, Storage Tank, Heat Exchanger, etc.) and Line sizing calculations.
• Analyze detailed construction and internal part of stationary Equipment design.
• Analyze and review P&ID, Piping Lay Out, Equipment Lay Out, and isometric drawing.
• Participate in determining Mechanical integrity.
• Support Maintenance activities.
• Analyze all aspect of Mechanical design requirements including the compilation of scopes of work and specificationsto evaluate optimum field development scenario for conceptual and FEL development.
• Interface with contractors, technical teams to integrate development plans with existing facilities for complex bid
• package.
• Responsible for AFE package, Scope of work, Cost Estimate and JSA.
• Necessary Interface with the Regulator, government agencies and other project stakeholders as required in
• facilitating design and permitting reviews
•To lead of Technical Bid Evaluation and recommend the bidder.
• Contribute in-house technical design reviews and document distribution
• Review the contractors technical work scopes are executed in accordance with Contract specifications, contract
• technical requirements and Industry codes & standards.
• Plan and promote all work to be implemented in a safe manner in support of the Project and Indonesian Business
• Units HSE objectives.
• Responsible for the review and assessment of the cost and schedule information.
Required & Preferred Skills/Competencies:
• Facilities Software Application.
• Working Knowledge of Mechanical Engineering work which included:
• Fundamental Principle, SEE
• Piping System
• Unfired Pressure Vessels
• Fired Equipment – Boiler and Heaters
• Atmospheric Storage Tank
• Heat Exchangers
• Heating, Ventilation and Cooling System.
• Safety System.
• Material Handling System.
• Operation and Maintenance.
Desired Experience Level:
Facilities engineering work for more than 5 years experience.
Rotating Equipment Engineering
COMPANY OVERVIEW
ConocoPhillips is an integrated energy company with interests around the world. Headquartered in Houston, the company had approximately 29,800 employees, $153 billion of assets, and $245 billion of revenues as of Dec. 31, 2011.
The company has announced plans to reposition its upstream and downstream businesses into two stand-alone, publicly traded corporations during the second quarter of 2013. Once the repositioning is complete, ConocoPhillips will become one of the industrys largest and most diverse global pure-play exploration and production companies, and Phillips 66, the downstream company, will become one of the largest U.S.-based refining companies, with integrated operations that also include segment-leading marketing, midstream and chemicals businesses.
ConocoPhillips repositioning is subject to market conditions, customary regulatory approvals, the receipt of an affirmative ruling from the U.S. Internal Revenue Service, the execution of separation and intercompany agreements and final board approval.
This position will reside within the Indonesia BU organization of the future ConocoPhillips, the upstream company.
ConocoPhillips is an equal opportunity employer
BASIC FUNCTION 
Responsible for the technical support and reliability of all Rotating/Mechanical Equipment (turbomachinery, compressors, engines, etc.) in COPI both onshore and offshore. Coach, train and evaluate the performance of rotating equipment personnel.
WORK DUTIES
• Provide expertise and technical guidance in installation, maintenance and repair of rotating equipment.
• Optimize the performance of rotating equipment.
• Give primary attention to gas compression, power generation, reciprocating compressors, gas turbines (Solar, Rolls-Royce RB211s and Avons), and the mechanical systems and processes supporting these components.
• Drive strategy and programs and primary rotating equipment maintenance in accordance with the ConocoPhillips maintenance and reliability framework.
• Provide budget estimates and costs for programs and strategies and rotating equipment work for Operations for the purposes of the budget and LRP.
• Support failure investigation processes, RCA, identification of problems through analysis, and provide technical solutions for rotating equipment problems.
• Engage with OEMs to get full technical support for all COPI issues with rotating equipment.
• Follow up on findings from turbomachinery performance monitoring (predictive maintenance) to prevent equipment failures.
• Have excellent teamwork with all Operations and Maintenance personnel to ensure appropriate support.
• Attend all routine Operations morning meetings to represent the M&R group.
• Position is located in the Jakarta Office; however, will need to periodically visit the field installations and with personnel onshore and offshore.
QUALIFICATIONS (EDUCATION & EXPERIENCE)• Mechanical Engineering degree with a minimum of 7-15 years of experience in oil and gas industry.
• Rotating equipment engineering experience with an operations or maintenance background.
• Fundamental skills in fluid dynamics, energy conversion, dynamic response and vibration applied to machinery and equipment. Knowledge of RR Avons/RB211s and Solar turbines. Experience in Videoimagescoping equipment and interpretation of images is desired.
• Broad knowledge in diagnosing, troubleshooting and repair of rotating equipment (including turbomachinery) used in gas/condensate/oil facilities.
• Broad understanding of various rotating equipment manufacturers products and services.
• Understands of how to use CMMS to provide sound planning, material ordering and work execution.
• Know-how in planning, condition/performance monitoring, instrumentation, data acquisition and control system.
• Demonstrates strong leadership and communication skills and the ability to maintain effective relationships with team members and both office and field operations personnel.
• Good communication skills in English (speaking & writing)
Environmental Excellence Waste Specialist Offshore
COMPANY OVERVIEW
ConocoPhillips is the worlds largest independent upstream energy company, based on proved reserves and production of liquids and natural gas. Headquartered in Houston, Texas, the company had operations in almost 30 countries and approximately 16,700 employees as of May 1, 2013, with 2011 average production of 1.62 million BOE per day and proved reserves of 8.4 billion BOE as of Dec. 31, 2011.
BASIC PURPOSE
The Environmental Specialist (Waste Management) assists in the advice, support and information gathering of Environmental and Regulatory matters related to waste management. This role assists in ensuring compliance with applicable regulations and COPI HSE policies and standards
NATURE AND SCOPE
• Jakarta Based with frequent visits to COPI assets (Offshore)
• Ensuring implementation of environmental management and monitoring programs at COPI assets (Offshore)
• As a liaison to other related departments
• Approaching, convincing and elevating any urgent environmental issues as necessary to obtain appropriate response
• To ensure implementation of environmental management and monitoring programs, including: to maintain compliance status; to promote beyond compliance efforts in environmental related areas; to integrate and support deployment of sustainable development programs
ACCOUNTABILITIES
• Assists in regulatory matters across multiple lines and functional work groups (e.g., Drilling, Operations, HSE, etc.).
• Provides expertise on environmental matters related to waste (i.e., hazardous and non-hazardous) including disposal, treatment, spills, reporting and permitting.
• Provides technical assistance in the event of a hazardous chemical spill (e.g., identifies pollutant, determine hazardous impact, and recommends corrective actions).
• Reviews reports of findings concerning spills to company and appropriate government environmental agencies.
• Participates in the development of procedures, processes and programs for waste management, spill prevention and spill response.
• Delivers environmental advice, assistance and support to HSE line management.
• Coordinates and assists in audits, assessments and gap analysis of waste management vendors and practices against Corporate and regulatory requirements.
• Maintains knowledge of and seeks ways to provide input of future requirements or regulations.
• Provide expertise, peer assist and internal audit for environmental management systems as it relates to waste management.
KEY DELIVERABLES / KEY DIMENSIONS 
• Support to HSE Function and line management
• Understanding of national regulations as related to waste (hazardous and non-hazardous)
• Audit/Verification
• Reporting
• Permitting
• Individual Contributor
BEHAVIOURAL & LEADERSHIP COMPETENCIES
• Expertise
• Communication
• Professional
• Accountability
• Results Oriented
• Collaboration
• Effective Team Player - acceptance, respect, and appreciation of others ideas and contributions
JOB REQUIREMENT
• Bachelors Degree in Environmental Engineering, Science or Health and Safety Major 5+ years of oil and gas industry experience in a waste management role.
• Possess knowledge of environmental management 
• Regulatory/reporting experience related to waste.
• Familiar with environmental management system
• Ability to demonstrate skills of Communication, Problem-solving, Interpersonal and Teamwork
In order to be considered for this position you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature on or before the requisition closing date of 17 Dec, 2013. To know further details about our company, visitwww.conocophillips.com. To apply for jobs in ConocoPhillips Indonesia, visit www.jobsdb.com.
ConocoPhillips is an equal opportunity employer

Advertisement

Anda baru saja membaca artikel Situs Lowongan Kerja Kota 2014 yang berkategori Lowongan Kerja Terbaru Migas 2013 dengan alamat judul Lowongan Kerja Terbaru 2013 Migas di ConocoPhillips; 4 positions. Anda bisa bookmark halaman ini dengan URL http://lowongan-kota.blogspot.com/2013/01/lowongan-kerja-terbaru-2013-migas-di.html. Terima kasih!
Info Lowongan Kerja Terbaru Update Bursa Lowongan Pekerjaan dan Karir Serta Loker Terbaru 2014 untuk SMP, SMK, SMF, SMA, D1, D2, D3, S1, S2, S2
Lowongan Kerja Terbaru 2013 Migas di ConocoPhillips; 4 positions | Tukiyooo | 5
Rabu, 30 Januari 2013

0 komentar:

Posting Komentar