Home » All posts

Sabtu, 14 Desember 2013

Lowongan Kerja Migas 2013 di Inspired Benchmark Sdn Bhd; 10 positions;

15.50 Tukiyooo No comments



We an established Engineering Management and Technical Service company with PETRONAS license in Malaysia for the Oil & Gas (Onshore/Offshore) project. We are looking for dedicated and motivated professionals to join us in Malaysia for the following positions;
(1) LEAD/SENIOR PROCESS ENGINEER
• Minimum B.Sc. in Chemical Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience,
o At least 12 years in process detailed design for offshore and/or onshore oil & gas projects
o As Lead/Senior Process Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Commissioning and Operation is highly valued.
• Minimum Technical knowledge on:
a) Competency in HYSYS/Flarenet Simulation or equivalent process dynamic simulation software
b) Relief and Blow-down Study
c) Equipment Sizing and Calculation
d) HAZOP, SIL, and RAM Study
e) Material Selection and Corrosion Study
f) Process Start-Up, Shutdown, Control and Operating Philosophy / Detailed Narratives
(2) LEAD/SENIOR MECHANICAL ENGINEER
• Minimum B.Sc. in Mechanical Engineering or equivalent and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in mechanical engineering scope execution and management for offshore and/or onshore oil & gas projects
o As a Lead/Senior Mechanical Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Fabrication, Commissioning and Operation is highly valued. Minimum Technical qualifications on:
a) Mechanical Design on Equipment Internals and Assembly for Rotating and Static Equipment
b) Thermal Design and Calculation
c) Basic Pressure Vessel design calculation (PVelite)
d) Material Handling Study
e) Equipment Testing and Inspection Requirement
f) Material Selection and Corrosion Study
g) HVAC Design
(3) LEAD/SENIORINSTRUMENT/CONTROL ENGINEER
• Minimum B.Sc. in Instrument Engineering or equivalentand registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in Instrument/Control detailed design for offshore and/or onshore oil & gas projects
o As a Lead/Senior Instrument Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
• Minimum Technical qualifications on:
a) Process and Control Philosophy
b) State of the art Integrated control and safety system (ICSS) and its project execution
c) Fire & Gas Mapping and Specifications
d) Control, Safety Valves, RO and Cable Sizing
e) In tools software
f) Instrumentation Selection Study
g) HAZOP, SIL, RAM, Alarm Management Study
h) Knowledge of offshore facility telecommunications scope is a strong advantage
(4) LEAD/SENIOR ELECTRICAL ENGINEER
• Minimum B.Sc. in Electrical Engineering or equivalent and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in electrical detailed design for offshore and/or onshore oil & gas projects
o As a Lead/Senior Electrical Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
• Minimum Technical qualifications on:
a) Electrical Equipment and Motor Sizing (ETAP software)
b) Electrical state of the art Integrated Motor Control System (IMCS) Design
c) Electrical Design Studies e.g. Load Flow, Transient Stability, Harmonic Level, Short Circuit, Load Sheddingand Black Start Studies
d) Cable Sizing
e) E-house Design
f) Single Line, Wiring and Logic Diagrams
(5) LEAD STRUCTURAL/ARCHITECTURAL ENGINEER
• Minimum B.Sc. in Civil/Structural Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in structural/architectural detailed design for offshore and/or onshore oil & gas projects
o As a Lead/Senior Structural/Architectural Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
• Minimum Technical qualifications on:
a) Competency in Structural Analysis Software e.g. STAAD Pro, SACS, MOSES or any other equivalent software
b) Equipment Seating Design, Pipe design
c) Structural Dynamic Vibration Analysis
d) Effective weight control, COG management
(6) LEAD/SENIOR NAVAL ARCHITECT
• Minimum B.Sc. in Structural or Mechanical Engineering and registered with BEM. A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in Naval Architecture detailed design scope for offshore oil & gas and floaters projects
o As a Lead/Senior Naval Architect for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in supporting fixed structure and/or floater loadout, inclination test, wet tow, floatover, upending operations etc. is highly valued.
• Competency in Dynamic Analysis Software e.g. MOSES, Ansys, GHS or any other equivalent software.
(7) LEAD/SENIOR MARINE ENGINEER
• Minimum B.Sc. in Mechanical Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in Marine engineer detailed design scope for offshore oil & gas floater projects
o As a Lead/Senior Marine Engineer for at least 1 oil & gas floater EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in supporting Fabrication, Commissioning and Operation of floaters is highly valued.
• Competency in the following areas:-
a) All floater marine systems – ballast, IG blanket systems
b) Hard and soft mooring, hydraulic tension system
c) Product evacuation system, pumps, hose balcony design
d) Accommodation, utilities, engine room, thruster, communication system
e) Marine monitoring system – acceleration, wave, current ADCP, weather system
f) Stability monitoring system
(8) LEAD/SENIOR PIPING ENGINEER
• Minimum B.Sc. in Mechanical Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in Piping engineering scope execution and management for offshore and/or onshore oil & gas projects
o As a Lead/Senior Piping Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
• Minimum Technical qualifications on:
a) Piping item, valves, special items
b) Optimum material selection (pressure containing, soft parts, etc.)
c) Valve Design
d) Pipe Stress Analysis (CAESAR II)
e) Pipe, Exhaust and Ducts Support Design
f) Basic knowledge on Equipment Layout Design and 3D Modeling
(9) LEAD/SENIORPROCESS SAFETY ENGINEER
• Minimum B.Sc. in Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
• Min. 15 years relevant working experience
o At least 12 years in process safety detailed engineering scope execution and management for offshore and/or onshore oil & gas projects
o As a Lead/Senior Process Safety Engineer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Health, Safety and Environment requirement for oil and gas processing facilities is highly valued.
• Minimum Technical qualifications on:
a) Safety Critical Element Assessment
b) Safety Case Studies – Design and Operations (Phast software)
c) HAZOP, SIL and RAM Study
d) Firewater System Design (Pipenet software)
e) Flare, Radiation, Exhaust and Dispersion Study (Flaresim software)
f) Escape, Evacuation and Rescue Assessment
g) Noise and Vibration Assessment
h) Risk Assessment
(10) LEAD/SENIORPIPINGDESIGNER
• Minimum Diploma Mechanical Engineering or equivalent.
• Min. 15 years relevant working experience
o At least 12 years in Piping design scope execution and management for offshore and/or onshore oil & gas projects
o As a Lead/Senior Piping Designer for at least 1 CPP or FPSO EPCIC project.
• A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
• Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
• Minimum Technical qualifications on:
a) 3D design – PDMS, PDS
b) Pipe routing, GRP consideration
c) Piping item, valves, special items
d) Pipe, Exhaust, tray and ducts Support Design using MDS tool, cable length estimation tool, 2D GA cut.
e) Optimum Equipment Layout Design, deck layout and planning.
f) Constructability and operability/maintainability consideration in piping design.
g) Effective interface with other discipline – Structural, E&I, Mechanical, to resolve all clashes and progress design.
Please note that for position (1) to (10), candidate with less experience (see below) may apply and be considered in a non-lead/non-senior engineer role.
• Min. 10 years relevant working experience
• At least 7 years in related discipline detailed engineering scope execution and management for offshore and/or onshore oil & gas projects
• As a related discipline engineer for at least 1 CPP or FPSO EPCIC project.
All positions shall be based in Kuala Lumpur, Malaysia. Attractive salary & Good Package Offered : Tax free, Accommodation & Transportation provided, Annual Return Ticket, Uniforms & Safety Gears, Overtime/Ex-gratis, Insurance coverage for personal accident, Surgical & Hospitalization.
Kindly submit the application to iinsbmark@yahoo.com with the following details;1. Latest update curriculum vitae
2. Color copy of certificates qualifications
3. Expected Salary (prefer in Ringgit Malaysia)
4. Availability
5. Skype ID
Read more »

Lowongan Kerja PT Batan Teknologi (Persero) - November 2013

13.55 Tukiyooo No comments

PT Batan Teknologi (Persero) adalah Badan Usaha Milik Negara yang berlokasi di Kawasan PUSPIPTEK, Gedung 70, Setu – Tangerang Selatan, Banten menawarkan kesempatan berkarir bagi kandidat muda yang dinamis dan professional untuk mengisi posisi:
  
“PELAKSANA KESELAMATAN”
Kualifikasi :
  • Pendidikan terakhir Sarjana Jurusan Teknik, IPK minimal 2,75
  • Lulusan dari universitas negeri dengan akreditasi min. B atau universitas swasta dengan akreditasi min. A
  • Usia maksimal 25 Tahun
  • Diutamakan memiliki Sertifikat Pelatihan SMK3
  • Memiliki kemampuan mengoperasikan komputer dalam lembar kerja & laporan lainnya yang diperlukan dalam Ms. Excel/ Ms. Word/ Ms. Office Tools lainnya serta Internet
  • Memiliki kemampuan Bahasa Inggris, Toefel minimal 450
  • Bersedia bekerja lembur jika dibutuhkan
  • Jujur, teliti, disiplin, bertanggung jawab, sanggup bekerja keras & dapat bekerja dalam tim
  • Memiliki Kemampuan untuk bekerja secara mandiri
  • Berkemauan keras & memiliki motivasi kerja
  • Dapat menjaga kerahasiaan Perusahaan
Lamaran diterima paling lambat hari Rabu, 21 November 2013, dengan mengirimkan surat lamaran lengkap ke :
PT Batan Teknologi (Persero)
Kawasan PUSPIPTEK Gd. 70
Setu – Tangerang Selatan 15312
PO BOX 343 Ciputat 15400
Catatan :
  • Hanya Pelamar yang memenuhi kualifikasi yang akan dipanggil
  • Tangerang Selatan, 13 November 2013
  • Subdivisi Adm. dan Personalia
Sumber Lowongan Kerja
Read more »

Posted in: ,,

Lowongan kerja PT Elnusa Tbk desember 2013

12.07 Tukiyooo No comments

PT Elnusa Tbk
LOWONGAN KERJA BUMN 2013 -  PT Elnusa Tbk merupakan salah satu perusahaan dengan bisnis pengeboran minyak serta pertambangan gas dengan standar internasional. Secara umum perseroan merupakan perusahaan migas dengan lebih mementingkan keselamatan kerja dan lingkungan. Sesuai dengan bidang yang dikelola, elnusa merupakan anak perusahaan dari pertamina yang memiliki mayoritas saham. Dengan dilengkapi dengan keunggulan dalam operasional elnusa mempunyai aliansi strategis bersifat multi nasional. Elnusa berharap tumbuh dan berkembang menjadi pemegang pasar minyak dan gas secara global. Perseroan yang mempunyai pengalaman lebih banyak dari berbagai bisnis minyak dan gas hulu di indonesia. Bidang yang digeluti elnusa mencapai pengeboran migas serta dalam mengoperasikan dan memelihara ladang minyak dan gas. Disamping itu elnusa memberikan pelayanan manajemen pengeboran serta pengadaan peralatan pengeboran kepada beberapa klien atau mitra perusahaan. Jika kita lihat struktur organisasi perusahaan memiliki dukungan dari tenaga ahli yang berkompeten serta beroperasi dengan menggunakan teknologi canggih yang sudah berstandar internasional

Kali ini Elnusa membutuhkan beberapa talenta muda berbakat yang memiliki pengalaman dan memiliki skill dan pengetahuan dasar tentang instrumen. Penerimaan ini mencari kandidat yang suka dengan tantangan baru berdasarkan jurusan teknik melalui lowongan kerja elnusa berikut ini

Lowongan kerja PT Elnusa Tbk 
Trainee Instrument Engineer
  1. Calon kandidat Lulusan sarjana teknik elektro/ elektronik, fisika, mekatronika/ elektromekanis
  2. Calon kandidat Berpengalaman minimal 2 tahun
  3. Calon kandidat memiliki skill dan pengetahuan dasar tentang instrumen
  4. Calon kandidat Berumur dibawah 28 tahun
  5. Calon kandidat Siap ditempatkan di semua area
Bila kamu tertarik dengan posisi jabatan yang ditawarkan Elnusa silakan lengkapi semua persyaratan diatas dan kirimkan aplikasi lamaran anda secara online melalui situs resmi jobstreet sesuai dengan batas lowongan yang sudah ditentukan.
Untuk informasi lebih detail lihat di sumber

Note : Rahasia lulus dalam perusahaan Bumn?? baca disini

Terimakasih sudah membaca artikel terbaru dari lowongan kerja Elnusa desember 2013 semoga saja bisa membantu kawan-kawan dalam pencarian pekerjaan yang sesuai dengan kriteria dan bidang anda. Demikianlah informasi yang kami himpun atas kunjungannya diucapkan terimakasih.Gbu

Read more »

Posted in: ,

Lowongan kerja PT Permodalan nasional madani (persero) desember 2013

09.49 Tukiyooo No comments

PT Permodalan nasional madani
LOWONGAN KERJA BUMN 2013 - PT Permodalan Nasional Madani (Persero) merupakan lembaga keuangan yang berperan dalam mengembangkan pembiayaan dalam usaha mikro, kecil, menengah, dan koperasi. Perusahaan ini tergolong badan usaha milik negara yang berperan aktif dalam meningkatkan program pemerintah dalam mensukseskan perekonomian masyarakat dikalangan pelaku usaha. Program ini menjadi salah satu solusi pemenrintah dalam pemberian jasa pembiayaan melalui akses permodalan untuk pelaku usaha yang ingin berkembang menjadi tangguh dan mandiri. Perusahaan ini akan menimbulkan dampak yang positif dalam menciptakan lapangan kerja baru dan mengurangi banyaknya pengangguran ditanah air.

Perjalanan Permodalan nasional madani dimulai pada tahun 1999 yang berdasarkan surat edaran yang dikukuhkan menteri keuangan. Dalam mengembangkan operasional, PNM mendapatkan suntukan modal dasar dari pemerintah yang bermanfaat dalam menjalankan tugasnya. Perseroan diyakini mampu meningkatkan pembangunan perekonomian secara nasional dan menjadi solusi terbaik Usaha Mikro Kecil Menengah serta Koperasi dalam aspek finansial atau non finansial

Permodalan nasional madani menerapakan metode yang efektif dan efesien dalam meningkatkan operasional dan berdasarkan prinsip-prinsip ekonomi financial terkhususnya di pasar domestik. Pemberian modalpun sudah didata dengan rinci sehingga pemberian modal jatuh kepada pelaku UMK yang ingin berusaha. Dengan mengembangkan mutu layanan dan kualitas sumber daya manusia, PNM mengajak talenta muda yang berpengalaman untuk berkarir melalui lowongan kerja terbaru Permodalan nasional madani dimana akan mencari pegawai yang akan menduduki dalam posisi jabatan berikut ini

Lowongan kerja PT Permodalan nasional madani
Marketing unit
  1. Pendidikan SMA/SMK
  2. Umur dibawah 32 tahun
  3. Calon kandidat berpengalaman min 1 tahun
  4. Calon kandidat bisa menggunakan word dan excell
  5. komunikasi yang baik, disiplin, jujur, orientasi pada target
  6. Punya SIM C dan kendaraan bermotor sendiri
Marketing training program
  1. Pendidikan SMA/SMK
  2. Umur dibawah 32 tahun
  3. Calon kandidat paham akan budaya lokal
  4. berpengalaman min 1 tahun
  5. Calon kandidat bisa menggunakan word dan excell
  6. komunikasi yang baik, disiplin, jujur, orientasi pada target
  7. Pelamar Punya SIM C dan kendaraan bermotor sendiri
Bila kamu memiliki kemampuan seperti penerimaan desember 2013 diatas silakan kirimkan aplikasi lamaran anda melalui email PNM sesuai dengan kota masing-masing. 
Informasi selengkapnya di sumber

Rahasia lulus dalam seleksi perusahaan Bumn?? baca disini

Itulah lowongan kerja BUMN terbaru dari Permodalan nasional madani (persero) semoga sangat  berguna untuk kamu yang sedang mencari pekerjaan dan kami berharap anda mempersiapkan diri secara matang dalam mengatasi semua tes seleksi Pnm. Silakan ikuti twitter kami di @lowongankerjalu untuk mendapatkan info loker terbaru tiap harinya. Atas kunjungannya kami ucapkan terimakasih.Gbu
Read more »

Posted in: ,,,

Lowongan Kerja PT. ARGA ARTA UTAMA

00.02 Tukiyooo No comments



Lowongan Kerja PT. ARGA ARTA UTAMA

Posisi : SENIOR SALES SUPERVISOR (SSS)

Persyaratan :
  • Pria
  • Usia 32 - 37 tahun
  • Memiliki leadership dan komitment dalam memimpin team sales mencapai target
  • Pendidikan minimal D3 dari semua jurusan
  • Punya kapasitas dalam kemampuan mencapai target
  • Pengalaman minimal 2 tahun di bidang yang sama
  • Memahami system penjualan direct selling
  • Penempatan kerja wilayah Depok
Kirim surata lamaran / CV anda ke :
Email : RECRUITMENT.ARGA@YAHOO.COM

Pendaftaran paling lambat tanggal 27 Desember 2013
Read more »

Posted in: ,